Betan Calibration Technique
The Authorized Diesel Calibration Service Center
Bosch Service

HOME
ABOUT US
BRANCHES
SERVICES
TIPS
TRAININGS
WHAT'S NEW
Inquiries

TERMS & CONDITIONS

Notice: Please read this document carefully before using this web site. Do not use this web site if you do not agree with the Terms and Conditions present in this document. Use of this web site signifies compliance with these Terms and Conditions.

Use of this Site

Betan Calibration Technique authorizes you to view and download designated electronic information at this Web site ("Site"). Such authorization does not transfer any right or title of the electronic information. This electronic information ("Betan Calibration Information") may consist technical information, product literature, and other materials. You must retain all copyright, trademark, and other proprietary notices present in the original Betan Calibration information and on any copies of the Betan Calibraition Information. You may not modify the Betan Calibration information obtained from this Site in any way or reproduce or publicly display, transmit, or distribute or otherwise use the Betan Calibration information for any commercial purpose. For purposes of these Terms, any use of the Betan Calibration information on any other Web site or networked computer environment (including but not limited to posting of Betan Calibration information on a local Intranet or Extranet) for any purpose is prohibited without the express written permission of Betan Calibration. The Betan Calibration information at this Site is copyrighted and any unauthorized use of any Betan Calibration information located at this Site may violate copyright, trademark, and other laws. If you fail to comply with these terms your authorization to use this Site automatically terminates and you must immediately destroy any Betan Calibration information obtained from the site.

Back to the top

Use of Technical Bulletins

Technical Bulletins available on this site are designed to inform the public about our products. These documents contain information that is subject to copyright, trademark and other policies. Information is to be considered the property of Betan Calibration. Use of this information for any marketing, competitive, or other commercial use is a violation of the license. THE DATA AND INFORMATION PRESENTED IN THESE TECHNICAL BULLETINS IS BELIEVED TO BE ACCURATE. ANY AND ALL LIABILITY FOR THE CONTENT OR ANY OMISSIONS FROM THESE TECHNICAL BULLETINS, INCLUDING ANY INACCURACIES, ERRORS, OR MISSTATEMENTS IN SUCH DATA OR INFORMATION IS EXPRESSLY DISCLAIMED. BETAN CALIBRATION DISCLAIMS ANY LIABILITY FOR USE OF BETAN CALIBRATION PRODUCTS IN APPLICATIONS OTHER THAN THOSE FOR WHICH THEY ARE DESIGNED. SEE THE DISCLAIMER AND LIMITATION OF LIABILITY SECTIONS FOR MORE INFORMATION ON THIS POLICY.

Back to the top

User Submissions

Any material, information or idea you transmit to or post on this Site by any means (including, but not limited to e-mails sent to Betan Calibration using links provided in this site) will be treated as non-confidential and non-proprietary. By transmitting or posting such information, you thereby grant Betan Calibration an unrestricted irrevocable, worldwide royalty free license authorizing Betan Calibration or its affiliates to disseminate or use such information for any purpose whatsoever, including, but not limited to, developing, manufacturing and marketing products. You are prohibited from posting or transmitting to or from this Site any unlawful, threatening, libelous, defamatory, obscene, scandalous, inflammatory, pornographic, or profane material, or any other material that could give rise to any civil or criminal liability under the law. The user may not post any material that violates copyright, trademark, or other proprietary rights (including rights of publicity and privacy). The user will indemnify Betan Calibration for any and all damages resulting from the user's actions or postings that violate any of these policies. Betan Calibration reserves the right to prohibit further postings by any user for violation of these standards.

Back to the top

Forums

Betan Calibration may, but is not obligated to, monitor or review any areas on the Site where users transmit or post public messages, including but not limited to the customer Support Forum. The user may not post any material that violates copyright, trademark, or other proprietary rights (including rights of publicity and privacy)or in any way violates the conditions set forth in this policy entitled "User Submissions". Betan Calibration, however, will have no liability related to the content of any such Communications. Additionally, the user will indemnify Betan Calibration for any and all damages resulting from the user's actions or postings that violate any of these policies. Betan Calibration reserves the right to edit information posted in these areas for content if Betan Calibration deems it appropriate.

Back to the top

Links To Other Web Sites

Links to third party Web sites not maintained by Betan Calibration on this Site are provided solely as a convenience to our customers and visitors. If you use these links, you will leave this Site. Betan Calibration has not reviewed all of these third party sites and does not control and is not responsible for any of these sites or their content. Betan Calibration does not endorse or make any representations about them, or any information, software or other products or materials found there, or any results that may be obtained from using them. If you decide to access any of the third party sites linked to this Site, you do this entirely at your own risk.

Back to the top

Disclaimer

THE BETAN CALIBRATION INFORMATION PROVIDED AT THIS SITE ARE PROVIDED "AS IS" WITHOUT ANY WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF INTELLECTUAL PROPERTY. BETAN CALIBRATION FURTHER DOES NOT WARRANT THE ACCURACY AND COMPLETENESS OF THE BETAN CALIBRATION INFORMATION AT THIS SITE. Betan Calibration may make changes to the materials at this Site, or to the products and prices described in them, at any time without notice. The BETAN CALIBRATION INFORMATION of this Site may be out of date, and Betan Calibration makes no commitment to update the BETAN CALIBRATION INFORMATION at this Site. Information published at this Site may refer to products, programs or services that are not available in your country or local area. Consult Betan Calibration directly for information regarding the products, programs and services that may be available to you. Applicable law may not allow the exclusion of implied warranties, so the above exclusion may not apply to you.

Back to the top

Limitation of Liability

IN NO EVENT SHALL Betan Calibration, ITS SUPPLIERS, OR OTHER THIRD PARTIES MENTIONED AT THIS SITE BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, CONSEQUENTIAL DAMAGES AND THOSE RESULTING FROM LOST PROFITS, LOST DATA OR BUSINESS INTERRUPTION) ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THIS SITE, ANY WEB SITES LINKED TO THIS SITE, OR THE MATERIALS OR INFORMATION CONTAINED AT ANY OR ALL SUCH SITES, WHETHER BASED ON WARRANTY, CONTRACT, TORT OR ANY OTHER LEGAL THEORY AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. If your use of the materials or information from this site results in the need for servicing, repair or correction of equipment or data, you assume all costs thereof. Applicable law may not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. THE DATA AND INFORMATION PRESENTED ON THIS WEB SITE IS BELIEVED TO BE ACCURATE BUT SHOULD NOT BE RELIED UPON BY THE USER FOR ANY PURPOSE. ANY AND ALL LIABILITY FOR THE CONTENT OR ANY OMISSIONS FROM THIS WEB SITE, INCLUDING ANY INACCURACIES, ERRORS, OR MISSTATEMENTS IN SUCH DATA OR INFORMATION IS EXPRESSLY DISCLAIMED. Betan Calibration DISCLAIMS ANY LIABILITY FOR USE OF Betan Calibration PRODUCTS IN APPLICATIONS OTHER THAN THOSE FOR WHICH THEY ARE DESIGNED.

Back to the top

Applicable Laws

Betan Calibration Technique administers this Site from its branch office in Mandaue City, Cebu, Philippines. Betan Calibration makes no representation that materials at this Site are appropriate or available for use outside the Philippines, and access to them from territories where their contents are illegal is prohibited. You may not use or export or re-export the materials at this Site or any copy or adaptations in violation of any applicable laws or regulations including without limitation Philippine export laws and regulations. If you choose to access this Site from outside the Philippines, you do so on your own initiative and are responsible for compliance with applicable local laws. These Terms will be governed by and construed in accordance with the laws of the Republic of the Philippines, without giving effect to any principles of conflicts of laws.

Back to the top

COPYRIGHT NOTICE. Copyright © 1999 - 2001 Betan Calibration Technique. All rights reserved.

TRADEMARKS. Robert Bosch GmBH, Bosch Service, Bosch ESI, Bosch 815, Bosch Injection Pump, Bosch Injectors, Bosch Common Rail, Stanadyne, Denso, Denso ETSI, Doowon, Mico, Zexel, CAV Lucas, Lucas Varity, Delphi Automotive, and other products referenced herein are either trademarks or registered trademarks of their respective owners. The names of actual companies and products mentioned herein may be the trademarks of their respective owners. The example companies, organizations, products, people and events depicted herein are fictitious. No association with any real company, organization, product, person, or event is intended or should be inferred.

Any rights not expressly granted herein are reserved.

General

Betan Calibration reserves the right to modify these Terms at any time. The terms on this page are binding upon you, therefore, you should review them often. Terms listed in this document may be superseded by specific terms elsewhere on the site.

Back to the top

Order Forms, Registration Forms, and e-mail

This site uses forms to generate e-mails that are then used to submit order inquiries, submit registration information, employment applications and other business processes. Betan Calibration explicitly states that these forms do not constitute any agreement between Betan Calibration and the person submitting the form. Betan Calibration expressly disclaims any and all liability whatsoever in relation to the delivery and processing of these forms. If your need is urgent, please contact Betan Calibration directly via telephone. e-mail that is sent to Betan Calibration is transmitted via the Internet. Betan Calibration is not responsible for any delays caused due to problems with the delivery of, processing of, or the security and privacy of Internet e-mail.

Back to the top

 

 

Copyright © 1999-2004 Betan Calibration Technique All rights reserved. Terms & Conditions